Front table bellyboat set

Please let me know when the product is available again:


This table is the perfect size for belly boats 800 x 200 mm. It was designed together with professional anglers and tested extensively before going into production. In total we had to change the table 8 times until it was completed.

The table is made of 2 mm thick aluminum and has a particularly thick and shock-resistant black coating.

This table is often used in combination with our front bars Gr800, Gr820 and Gr850. These are particularly easy to attach to the belly and they do not rotate. This is the basic requirement to be able to use the table. The standard front bars supplied must be fixed to prevent twisting or replaced with our front bars. Our front bars require 2 glued brackets on the belly. Many customers remove the old pads and then stick Railblaza or Fasten pads on them so that our front bars can be attached there.

A scale can also be glued into the "inside-flat" version (included in the set). For this purpose, the laser-cut holes were deepened so that the 8 included screws can be sunk absolutely flush into the table. Both versions have slots on the sides so that water can drain away or you can expand the table with side pockets. The slots are subject to the Molle standard. The Molle system is widely used in hiking and military bags.

With the "Inside 2 x brackets" the brackets are very flat and recessed into the table.

Product details:

  • Size: 800x200x2mm (length, width, height)
  • light aluminum
  • Shockproof elephant skin coated
  • Additional brackets can be mounted
  • black dull
  • suitable for round tubes 30mm and 32mm